dielectric-boots.jpg

Category Leading
Protective Footwear
Find out more

workmaster-boots-chemical-protection.jpg

Workmaster™ is a division of Respirex™

A leading supplier of personal protective solutions, specialising in the design and manufacture of high-performance chemical, particulate and respiratory protective clothing.

About Us

 

Workmaster™ is a division of Respirex™

A leading supplier of personal protective solutions, specialising in the design and manufacture of high-performance chemical, particulate and respiratory protective clothing.

About Us

 

workmaster-boots-chemical-protection.jpg
quality.png

Quality

Customers trust our brands for excellence and reliability.  People’s lives depend upon the integrity of our products.  So nothing matters more than quality and safety.

technical.png

Technical Expertise

Our specialist expertise has developed over 60 years. You can depend upon our advice and experience to keep your workforce safe and well protected.

flexible.png

Flexible

For us the customer is King.  We can design and manufacture products that will exactly meet your needs, however challenging the requirements!

honest.png

Honest and Reliable

We are open and honest in all our business dealings and ‘our word is our bond’. We’ll also admit our mistakes if things aren’t right.

News & Events

Still 2025-12-01 163143_1.4.1.png

News

Workmaster Boots New Environmental Approach

Workmaster boots are committing to a new more environmentally conscious approach, by reducing paper & ink usage.
Read more
Copy of Untitled Design-4.png

News

Simplair A2 New Development

The new Simplair A.2 suits, hoods, and tank suits are now CE certified and feature a reconfigured air delivery system that routes over the top of the head, rather than around the sides of the face.…
Read more
Respirex & Merstham Bees SEN Team.jpg

News

Respirex Proudly Sponsors Merstham Bees SEN Football Team

We are delighted to announce our sponsorship of the Merstham Bees SEN Football Team, a fantastic initiative that provides a fun and inclusive football experience for children aged up to 15.
Read more

ActiveAir API Suit

The ActiveAir API suit is a single-use Type 3 (liquid-tight), one-piece suit with an integral breathing
and cooling air system that provides the highest level of protection against particulate and liquid chemical hazards. 

Manufactured from our high-performance Chemprotex™ 300 chemical barrier fabric, the suit is designed for use with breathable air supplied from an external compressed air source providing positive pressure

A range of foot and glove options are available allowing the suit to be tailored to the requirements of the chosen application

More Details

ActiveAir AutoFlow Hood

The ActiveAir AutoFlow hood is a single-use Type PB [4] (partial body, spray-tight), hood with a reusable, removable air
system that provides the highest level of protection against particulate and liquid chemical hazards. 

Manufactured from our high-performance Chemprotex™ 300 chemical barrier fabric, the suit is designed for use with breathable air supplied from an external compressed air source providing positive pressure

The hood is designed to be worn with compatible protective coveralls.

More Details

ActiveAir AutoFlow Suit

The ActiveAir AutoFlow suit is a single-use Type 3 (liquid-tight), one-piece suit with a reusable, removable air system that provides the highest level of protection against particulate and liquid chemical hazards. 

Manufactured from our high-performance Chemprotex™ 300 chemical barrier fabric, the suit is designed for use with breathable air supplied from an external compressed air source providing positive pressure

A range of foot and glove options are available allowing the suit to be tailored to the requirements of the chosen application.

More Details

Auto-Rewind Hose Reel

The Respirex automatic rewind hose reel has been designed to provide a safe, convenient and efficient way to deploy air hose where required. Constructed in high impact UV stabilized polypropylene for all-purpose corrosion free durability, the hose reel can be installed indoors or out.

At an average weight of just 10 kg (22 lb) including hose, these reels are ideally suited for fixed position applications or for use as portable hose packs. All reels are supplied with hose ready for easy installation. A simple mounting bracket is included for wall or overhead positioning which allows the reel to swing through up to 270º or to be fixed centrally.

An equally simple optional bench or floor mount is also available. Both brackets feature a padlock facility to secure the reels in place. The automatic rewind hose reel reduces the possibility of accidents and helps to improve the working environment. The user pulls out the length of hose required which is then automatically rewound after use. In addition to neat and tidy storage, the loose effort re-wind tension makes the automatic rewind hose reel safe and easy to use even with the hose fully extended.

More Details

AutoFlow 2-9 Regulator

The AutoFlow 2-9 regulator is a reusable belt mounted breathing air regulator for use with the ActiveAir AutoFlow Range of suits and hoods. The regulator operates from a working inlet pressure between 2 and 9 bar (29 to 130 psi) and maintains a consistent, comfortable airflow into the suit or hood, while minimising noise. 

The regulator includes a low-flow warning whistle, to alert the wearer if the inlet pressure drops below the Manufacturers Minimum Design Flow (MMDF) and is mounted to a padded waist belt for all day comfort.

More Details

Automatic Test Box

A computer controlled testing unit that automatically inflates a suit from a compressed air supply (max 3.5 bar) and performs a pressure test giving a graphical display with a clear pass or fail indication.

The test cycle can be carried out by the equipment without an operator being present and with the display frozen the operator can return at any time to check on the status of the suit.

Designed specifically for determining the leak tightness of gas-tight chemical protection suits (internal pressure test) to the European standard EN464:1994 as required by clause 6.3 of EN943-1:2002

This product has now been discontinued and replaced with our new automatic test box.

More Details

Automatic Test Box Ver.3

A computer controlled testing unit that automatically inflates a gas-tight suit from a compressed air supply (max 3.5 bar) and performs a pressure test giving a clear progress/status display and pass or fail indication at the end of the test. 

More Details

Casualty Transport Bag

A casualty transport bag manufactured in Chemprotex™ 300, a high performance chemical barrier material.

More Details

CBRN Body Bag

A gas-tight body bag, designed to contain chemically contaminated mortalities and body parts after a CBRN incident.

Manufactured in Tychem® TK, a high-performance multi-layer chemical-barrier fabric, reinforced with a durable PVC base the CBRN body bag is lightweight and extremely durable.

Supplied in a sealed polythene bag and packed in a waterproof PVC stowage bag with webbing strap handles.

This product is now discontinued, our new generation CBRN body bag is available here.

More Details

CBRN Body Bag (Chemprotex™ X)

A gas-tight body bag, designed to contain chemically contaminated mortalities and body parts after a CBRN incident.

Manufactured in Chemprotex™ X, a high performance multi-layer chemical-barrier fabric the CBRN body bag is lightweight and extremely durable.

More Details

CBRN Body Bag (Tychem® TK)

A gas-tight body bag, designed to contain chemically contaminated mortalities and body parts after a CBRN incident.

Manufactured in Tychem® TK, a high-performance multi-layer chemical-barrier fabric, reinforced with a durable PVC base the CBRN body bag is lightweight and extremely durable.

Supplied in a sealed polythene bag and packed in a waterproof PVC stowage bag with webbing strap handles.

More Details

CBRN Overboots

A chemically protective anti-static overboot with an ambidextrous quick-don design.  Tested against a broad range of hazardous chemicals and chemical warfare agents, the boot design allows it to be fastened single-handedly in less than five seconds.

More Details

Chemical Splash Hood

 

Reusable chemical anti-splash hoods

More Details

Citrikleen HD

Citrikleen is a high-quality hydrocarbon based solvent emulsion cleaner and degreaser, which is completely biodegradable after soil release.

Dilute Citrikleen is recommended for the removal of heavy grease, oil and other petroleum type oil deposits from Respirex protective clothing. It contains only biodegradable ingredients and is designed for applications where the use of highly flammable and toxic solvents or caustic alkalis are undesirable or prohibited.

More Details

Dielectric Class 2 Boots

An electrically insulating dielectric boot with an integral steel toe cap and vulcanised rubber sole for superior slip resistance. The Respirex Dielectric boot allows high-voltage live working at up to 17kV, with every boot tested at 20kV AC, with optional DC testing at 40kV (Class 1). 

More Details

Dielectric HV3 Class 3 Boots

A Class 3 AC (EN 50321-1:2018) electrically insulating dielectric boot with an integral steel toe cap. The Workmaster™ Dielectric HV3 boot allows high voltage live working at up to 26.5kV with every boot tested at 30kV.

More Details

Donaldson Portable Air Filter

A portable filter box to remove particles and odours.

The Ultrapure ALG 20 is applied when the breathing air is contaminated by the working process itself, as for example during sandblasting, varnishing, paint production, in chemical industries, in plastics industries or working places where the air quality is impaired. 

If the compressed air is centrally pre-purified and carbon monoxide (CO) and carbon dioxide (CO2) concentration in the compressed air do not exist, the Ultrapure ALG 20 with its two respectively three filter stages is used as an additional solution for purification application.

More Details

Drum Containment Bag

A gas-tight containment bag, designed to cover a typical 200 litre (600mm ø x 880mm) drum used for chemical storage and transportation. The bag is designed to safely contain and transport drums that are leaking or emitting hazardous vapours. 

Manufactured in Chemprotex™ X, a high performance multi-layer chemical-barrier fabric, the drum containment bag is lightweight and extremely durable. 

More Details

Flo Pod Suit

A single-use one-piece suit incorporating the Flo- Pod™ powered respirator and P3 filter with a large visor for excellent all-round visibility.

Manufactured in Chemprotex™ 300 material for excellent chemical, particulate and infective agent protection.

This product is now discontinued.

More Details

Flo Pod Turbo

The FLO-POD™ is a simple to use powered air respirator for use against fine dust, particulate spray or micro-organisms. Powered by a belt mounted battery pack the FLO-POD™ is designed to fit directly into the visor of compatible suits and hoods, allowing the user full operational freedom.

Designed from the outset to be comfortable and simple to use, the FLO-POD™ requires little familiarisation prior to use and is lightweight and quiet in operation.

This product is now discontinued.

More Details

Fog Off

An excellent cleanser with anti-fogging and anti-misting properties designed for Respirex suit visors. Provided in a coinvent spray bottle, Fog Off is nontoxic, noncorrosive, non-irritant, ozone friendly, and entirely safe to use on any visual surface. 

Simply spray onto the surface and gently buff with a lint free cloth.

More Details

Frontair 2 Chemprotex™ 300 Suit

The Frontair 2 in Chemprotex™ 300 is a single-use air-fed chemical protection suit that provides the highest level of protection against particulate contamination with added chemical protection. The suit is designed for use with breathable air supplied from an external positive pressure compressed air source with a low flow warning alarm.

More Details

Frontair 2 PVC Suit

The Frontair 2 in blue tinted transparent 300 micron PVC is a single-use air-fed chemical protection suit that provides the highest level of protection against particulate contamination. The suit is designed for use with breathable air supplied from an external positive pressure compressed air source with a low flow warning alarm.

More Details

Gas-Tight Training Suit

A training version of the Respirex fully encapsulating Type 1A - ET regular robustness gas-tight suits. The suit is manufactured in green PVC and clearly marked training suit to avoid confusion in an emergency.

Training suits reproduce the features of the operational suit and are designed for multiple re-use with no testing required.

More Details

GLS 300A Gas-Tight Suit

The single-use GLS 300A suit in Chemprotex™ 300 is a fully encapsulating Type 1a gas-tight chemical protection suit covering both the wearer and the breathing apparatus. 

The suit combines the comfort and flexibility of a lightweight high-performance chemical barrier fabric with a gas-tight construction. It incorporates a choice of permanently attached antistatic chemical gloves, sock feet and a lightweight gas-tight zip. 

More Details

GLS 300B Gas-Tight Suit

The GLS 300B suit in Chemprotex™ 300 is a single use Type 1b gas-tight chemical protection suit with an integral facemask seal designed for use with breathing apparatus worn outside the suit, a facemask and filter or airline respirator. 

The suit combines the comfort and flexibility of a lightweight high-performance chemical barrier fabric with a gas-tight construction. It incorporates a choice of permanently attached antistatic chemical gloves, sock feet and a lightweight gas-tight zip. 

More Details

GLS 300C Gas-Tight Suit

The GLS 300C suit in Chemprotex™ 300 is a single use Air-fed Type 1c gas-tight chemical protection suit for use with breathable air supplied from an external positive pressure compressed air source. 

The suit combines the comfort and flexibility of a lightweight high-performance chemical barrier fabric with a gas-tight construction. It incorporates a choice of permanently attached antistatic chemical gloves, sock feet and a lightweight gas-tight zip. 

More Details

GTA Gas-Tight Suit

The GTA is a Type 1C reusable gas-tight suit designed to be used with an external compressed air source providing breathing and cooling air.

Manufactured in a range of chemically resistant fabrics the GTA is designed for long duration use in harmful atmospheres.

More Details

GTB ET Enhanced Robustness Gas-Tight Suit

The fully encapsulating GTB is a Type 1A - ET enhanced robustness reusable gas-tight suit covering both the wearer and breathing apparatus. Manufactured in a choice of hard wearing reusable suit materials including;

Viton®/Butyl/Viton® (VBV), a premium coated fabric in high visibility orange DuPont™ Viton®  that provides excellent chemical protection and is the hardest wearing fabric option in the GTB suit range.

ChloroTex a high-performance laminate material with a CSM (chlorosulfonated polyethylene) rubber orange inner and red outer surface and an internal chemical barrier film. Chlorotex proves excellent chemical resistance in a comparatively lightweight but durable reusable garment material.

Laminate Viton® material consists of a polyester fabric coated one side with orange fireproof DuPont™ Viton® and one side with grey thermoplastic with an insert barrier film.
 

More Details

GTB™ Type 1 Gas-Tight Suit

The fully encapsulating GTB is a Type 1A enhanced robustness reusable gas tight suit covering both the wearer and breathing apparatus.

The suit is available in a range of chemically resistant fabrics, depending on the application and chemical challenge.

More Details

GTL ESD Gas-Tight Suit

The GTL ESD is a Type 1A - ET single use, regular robustness encapsulating gas-tight suit designed to protect the emergency responder against toxic, corrosive gases, liquids and solid chemicals. The Electro-Static Dissipative construction allows the suit to be used in potentially explosive (ATEX) atmospheres.

Manufactured in Chemprotex™ 400, a high performance multi-layer chemical-barrier fabric the GTL suit is exceptionally light weight and comfortable.

More Details

GTL Gas-Tight Suit

The GTL is a Type 1A - ET single use, regular robustness encapsulating gas-tight suit designed to protect the emergency responder against toxic, corrosive gases, liquids and solid chemicals.

Manufactured in Chemprotex™ 400, a high performance multi-layer chemical-barrier fabric the GTL suit is exceptionally light weight and comfortable.

More Details

GTR Regular Robustness Gas-Tight Suit

This fully encapsulating Type 1A - ET limited-life gas-tight suit is designed to protect the emergency responder against toxic or corrosive gases, liquids and solid chemicals.

The suit is manufactured from DuPont™ Tychem® TK a high performance, multilayer, nonwoven, chemical barrier fabric that is also light in weight.

More Details

Hazbag

Hazardous material containment bag manufactured from Chemprotex™ 300 material. The bag is supplied with a strong cable tie to seal the neck of the bag with a tag and wallet on the tie for identification.

More Details

Hazmax™ Boots

A chemically protective anti-static boot with an integral steel toe cap and vulcanized rubber sole.

More Details

Hazmax™ CBRN Boots

Specifically developed for CBRN response, the Hazmax™ CBRN S5 safety boot provides the same comfort and chemical resistance as our popular Hazmax™ chemical safety boots, but with enhanced protection against chemical warfare agents.

More Details

Hazmax™ ESD Boots

A chemically protective Electro-Static Discharge (ESD) boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. Suitable for applications such as pharmaceutical electro-protective areas.

More Details

Hazmax™ ESD FPA Boots

The Hazmax™ ESD FPA boot adds heat resistance to our proven high-performance chemically protective Hazmax™ ESD compound to produce the ultimate electrostatically dissipative chemical boot for emergency responders in ATEX environments.

More Details

Hazmax™ FPA Boots

A heat resistant version of the Hazmax™ chemical boot conforming to the EN15090 fire boot standard for flame resistance, radiant heat and heat insulation of the sole.

More Details

Inflatable Decontamination Showers

A range of inflatable decontamination showers that are lightweight and quick to deploy, manufactured in the UK by our sister company MFC International.

With no mechanical framework our decontamination showers are easy to transport and store when not in use. They stay standing and strong, without the need for continual inflation and can be erected on both soft and hard standings.

There are a wide range of optional accessories available and like all MFC products they are highly customisable and bespoke options can be designed to fit any requirements. 

More Details

Inflatable Shelters

Inflatable Shelters provide a quickly deployable structure that is simple to use, lightweight, compact and easy to transport. They are ideal for emergency or humanitarian use, but have a wide range of other applications including field hospitals, command centres, crime scene preservation, storage areas and vehicle maintenance.

Our sister company MFC International manufactures a range of inflatable shelters that can be set up in a matter of minutes, and will stay standing without continuous inflation. With no mechanical framework the shelters are lighter and more compact once packed.

All shelters are supplied with adjustable zipped entrances at the front and rear, providing a versatile solution that allows two or more shelters to be linked together if required. Shelters can be anchored on hard or soft standing, and guy ropes are provided for use in inclement weather.

More Details

Isolator Half Suit

The isolator half suit has been developed by Respirex in cooperation with leading pharmaceutical manufacturers for use within a positive or negative pressure chamber.

The suit incorporates features which allow the wearer to easily access or remove themselves from the garment and which also prevent the suit from collapsing against the wearer during use. Isolator suits are manufactured from a tough, lightweight, non-shedding material which is resistant to most workplace chemicals and sterilising agents and all suit surfaces are smooth for ease of decontamination.

More Details

ISOTEC Boots

A heat & flame resistant safety boot conforming to the EN 15090 HI3 F3A fire boot standard for flame resistance, radiant heat (20kW/m2) and heat insulation of the sole (250°C for 40 minutes). These boots are designed for use in areas where there is a risk of sparks from welding or grinding or for close proximity fire fighting.

More Details

Jackets & Trousers

Type 4 reusable chemically protective jackets and trousers

More Details

Kemblok™ Chemical Barrier Gloves

Manufactured using a seven-layer chemical barrier laminate material, Kemblok™ gloves provide excellent protection against a wide range of chemicals, viruses and micro-organisms.

More Details

Koolvest

Designed to provide comfortable cooling to wearers of sealed chemical PPE, the Koolvest uses four phase-change KoolPacks inside the vest (two at the front, two at the back) to maintain a comfortable cooling temperature to the wearers upper body.

More Details

Lifting Bags

We offer a range of lifting bags manufactured by our sister company MFC International. MFC Internationals range of lifting bags are used worldwide by rescue and recovery teams. They offer high-lift low-pressure lifting bags which are ideal for the recovery of large and heavy vehicles, whilst the new range of catch bags work in tandem to help minimise the impact of up-righting an overturned vehicle.

MFC also manufacture a range of high-pressure power mats for vehicle lifting, load stabilisation, releasing trapped casualties and the moving and positioning of otherwise unstable loads. The latest flat-profiled Stak Jak range can hold an even more stable load than traditional ovoid lifting mats and can be easily linked to increase their lifting capabilities.

More Details

Manual Test Box

A manual testing unit that can be used to perform a pressure test on Respirex gas- tight suits.

Gas-tight suits to EN943-2:2019 and EN943-1:2015+A1:2019 require periodic pressure testing to ensure the suit remains gas-tight. In addition reusable suits must be re-tested after each use. The manual test box provides a simple, cost effective means to re-test these suits.

More Details

MP Citrus

MP CITRUS is an exceptionally powerful cleaner and degreaser formulated from natural citrus oil extract to quickly cut through heavy grease, oil, fat, carbon, traffic film, dye and other soiling.

Dilute MP CITRUS is recommended for the removal of heavy grease, oil and other petroleum-type oil deposits from Respirex protective clothing. MP CITRUS is non-flammable, non-toxic and safer than similar solvent based products.

More Details

Neck Cloths & Wraps

For attachment to a safety helmet to provide neck protection from chemical splashes.

More Details

Nuprotex E Suit

The Nuprotex E is a one piece-coverall manufactured from 300 micron PVC. Designed to be worn with a full facemask (see approved list below), together with appropriate gloves and safety boots, the suit provides protection from radioactive particles and liquid spray.

More Details

Odor-Clear

Designed to be applied internally to chemical protective clothing to avoid micro fungal/bacterial infections and odour problems. Odor-Clear chemically eliminates organic odour without the use of masking fragrance and contains four linked detergents which provide an effective light cleaning action.

Odor-Clear is diluted 1:10 and applied by cloth or spray.

More Details

One-Piece Suits

 

Reusable Type 3 and 4 chemically protective one-piece suits

More Details

Post Decontamination Modesty Pack

The Post Decontamination Modesty Pack is for use after casualties have set aside their own garments and have been decontaminated in a drench shower.

Packs are available in infant, junior, medium adult and large adult sizes.

More Details

Powered Respirator Protective Suit (PRPS Jupiter)

The Respirex Powered Respirator Protective Suit (PRPS) is a one piece gas-tight chemical protective suit for use by emergency response personnel after a CBRN incident.

The suit is manufactured from DuPont™ Tychem® TK, a high performance, seven layer, nonwoven, chemical barrier fabric that is also light in weight.

This product is now discontinued, our new generation PRPS suit is available here.

More Details

Powered Respirator Protective Suit (PRPS)

The Respirex Powered Respirator Protective Suit (PRPS3) is a one piece gas-tight chemical protective suit for use by emergency response personnel after a CBRN incident.

The suit is manufactured from DuPont™ Tychem® TK, a high performance, seven layer, nonwoven, chemical barrier fabric that is also light in weight.

More Details

Pre Decontamination Modesty Pack

The Pre Decontamination Modesty Pack allows contaminated casualties to change from their own garments in as dignified a manner as possible prior to decontamination in a drench shower.

Packs are available in infant, junior, medium adult and large adult sizes.

More Details

PRPS Training Suit

The PRPS3-T is a training suit version of the PRPS3 (Powered Respirator Protective Suit) used extensively by CBRN emergency responders. Manufactured from hard-wearing PVC, with a removable (machine washable) neck seal and supplied with rechargeable batteries, the PRPS3-T replicates the operational characteristics of the PRPS3 while simplifying re-use. 

More Details

Reinforced Air Hoses

A range of compressed air hoses to EN 270, available in either yellow reinforced PVC or green heavy duty reinforced PVC.

More Details

RJS Clinical Suit

The Respirex RJS Powered Respirator Suit is a one piece liquid-tight chemical protective suit for designed for medical personnel and emergency responders. Two versions are available, the Clinical Version incorporates medical gloves and integral overshoes for use with shoes worn inside the suit. An optional emergency breather with P3 filter can be fitted at the shoulder as a fail-safe during casualty transport. The Standard Version (see separate product page) includes permanently attached chemical barrier gloves and a sock foot for use with safety boots worn on the outside of the suit. 

The suit is manufactured from Chemprotex™ 300, a high performance, five layer, nonwoven, chemical barrier fabric that is light weight with a spunbonded lining for wearer comfort. 

More Details

RJS Standard Suit

The Respirex RJS Powered Respirator Suit is a one piece liquid-tight chemical protective suit designed for industrial chemical and particulate hazard protection. The suit incorporates permanently attached Kemblok™ chemical barrier gloves with oversleeves and a sock foot with splash guard outer legs for use with safety boots worn on the outside of the suit. 

The suit is manufactured from Chemprotex™ 300, a high performance, five layer, nonwoven, chemical barrier fabric that is light weight with a spunbonded lining for wearer comfort. 

More Details

RJS Suit (Jupiter)

The RJS 300 Chemical Respirator Suit is a one-piece Type 3 chemical protective suit for use in hazardous industrial and emergency response environments.

Manufactured from Chemprotex™ 300, a high-performance, lightweight, chemical barrier fabric, the RJS suit protects the wearer against a broad range of industrial chemicals and other agents found in civil emergency situations.

This product has been discontinued and replaced with 2 new versions: The Standard RJS suit and the Clinical RJS suit.

More Details

SC1 Reusable Splash Suit

The Respirex SC1 is a reusable Type 3 splash contamination suit designed for Self Contained Breathing Apparatus (SCBA) worn externally.

The Reusable SC1 is designed to be laundered in commercial washing machines (see user instructions for laundering guidelines), ensuring a lower overall lifetime cost of ownership than the equivalent number of single use garments.

More Details

SC1 Splash Suit

The single-use SC1 chemical protective suit is manufactured from our high-performance Chemprotex™ 300 chemical barrier fabric. The liquid-tight (Type 3) design protects against contamination from liquid chemical splashes and can be used with breathing apparatus worn outside the suit or with a full facemask and filter. The SC1 is intended for use in areas that are not immediately dangerous to life or health.

More Details

SC1 Ultra Splash Suit

More Details

SC1 Ultra Splash Suit

The single-use SC1 Ultra chemical protective suit is manufactured from our high-performance Chemprotex™ 300 chemical barrier fabric. The liquid-tight (Type 3) design protects against contamination from liquid chemical splashes and can be used with breathing apparatus worn outside the suit or with a full facemask and filter. The SC1 Ultra is electrostatically dissipative and is intended for use in areas that are not immediately dangerous to life or health. 

More Details

SC4 Splash Suit

The SC4 in Chemprotex™ 300 is a single- use fully encapsulating Type 3 (liquid tight) suit covering both the wearer and the self contained breathing apparatus (SCBA). The rear-entry design incorporates integral Kemblok™ chemical barrier gloves and sock feet with splash guard outer legs.

More Details

Sellprotex BT Suit

The Sellprotex two-piece suit is a single use garment that provides the highest level of protection against particulate contamination. The suit is designed for use with breathable air supplied from an external positive pressure compressed air source.

More Details

Sellprotex Suit

The Sellprotex two-piece suit is a single use garment that provides the highest level of protection against particulate contamination. The suit is designed for use with breathable air supplied from an external positive pressure compressed air source.

More Details

Simplair A.E 360 Hood

A reusable air-fed chemically protective hood designed for use with breathable air supplied from an external positive pressure compressed air source.

Available in a range of chemical resistant fabrics and with a choice of visor styles, the hood provides partial body (PB) protection and is designed to be worn with a suitable protective suit or jacket and trousers.

More Details

Simplair A.E Blouse

A reusable air supplied half-suit available in a range of chemically resistant fabrics providing liquid and spray tight protection to the wearers upper body (Type PB[3] and PB[4]).

The blouse is designed to be worn with matching protective trousers and chemical safety boots.

More Details

Simplair Half C Blouse

Air supplied half-suit in orange neoprene material, fabrics providing upper body protection from liquid chemicals (Type PB[3] and PB[4]). The blouse is designed to be worn with matching protective trousers and chemical safety boots.

The Simplair Half C Blouse is NIOSH approved to Type C Continuous Flow Class, approval No: TC-19C-378.

Not available for sale in the UK or EU.

More Details

Simplair Hood

A reusable air-fed chemically protective hood designed for use with breathable air supplied from an external positive pressure compressed air source.

Available in a range of chemical resistant fabrics and with a choice of visor styles, the hood provides partial body (PB) protection and is designed to be worn with a suitable protective suit or jacket and trousers.

Both the Simplair A.E. and the new Simplair A.2 models are available. The A.2 version features a reconfigured air delivery system that routes over the top of the head, rather than around the sides of the face, ideal for those on longer shifts.

More Details

Simplair Suit

A reusable air-fed Type 2 ‘non-gas tight’ suit with integral cooling designed for use with breathable air supplied from an external positive pressure compressed air source.

Available in a range of chemical resistant fabrics the suit incudes a number of options for legs endings, visor, zips and zip flaps allowing the suit to be tailored to a specific application or process. 

Both the Simplair A.E. and the new Simplair A.2 models are available. The A.2 version features a reconfigured air delivery system that routes over the top of the head, rather than around the sides of the face, ideal for those on longer shifts.

More Details

Simplair Tank Suit

A reusable air-fed Type 2 ‘non-gas tight’ suit with integral cooling designed for use with breathable air supplied from an external positive pressure compressed air source.

Designed for heavy duty use the suit is available in a range of chemical resistant fabrics with a number of customisation options including leg endings, lifting eyes, reinforcement patches and suit identification.

Both the Simplair A.E. and the new Simplair A.2 models are available. The A.2 version features a reconfigured air delivery system that routes over the top of the head, rather than around the sides of the face, ideal for those on longer shifts.

More Details

Splashmaster Coverall

A lightweight, Type 3 liquid-tight, limited re-use hooded coverall, designed for use with a full face mask and filter or appropriate facial and respiratory protection. Manufactured from Chemprotex™ 300 the suit is highly chemically resistant and features a comfortable spun-bonded lining inside.

More Details

Water Rescue Products

Water, mud and ice rescue products are available from our sister company MFC International.  MFC International are a specialist manufacturer of inflatable rescue, recovery, and survival equipment based in Tonypandy, South Wales. Their equipment is used by fire brigades, mountain and lowland rescue, utilities, the military and humanitarian support organisations internationally and have earned an unrivalled reputation for product quality, durability and performance.

More Details

Water Storage

Water storage equipment is available from our sister company MFC International.  MFC International are a specialist manufacturer of inflatable rescue, recovery, survival equipment based in Tonypandy, South Wales. Their equipment is used by fire brigades, mountain and lowland rescue, utilities, the military and humanitarian support organisations internationally and have earned an unrivalled reputation for product quality, durability and performance.

More Details

Zipper Wax

Zipper Wax stick zip lubricant is ideal for protecting all kinds of zips from getting stuck. Just glide it along the metal or plastic zip on your PPE. It’s silicone-free lubricant works in all temperatures and weather conditions.

More Details

PRPS Suit 02.jpg

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.

PRPS Suit 02.jpg

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.

PRPS Suit 02.jpg

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.

PRPS Suit 02.jpg

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.

PRPS Suit 02.jpg

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.

PRPS Suit 02.jpg

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.

PRPS Suit 02.jpg

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.

Swipe to view data

Hazmax™
Search by chemical name or CAS number:
Chemical CAS Number Breakthrough times
acetaldehyde 75-07-0 >420mins
acetic acid, glacial 64-19-7 >480mins
acetone 67-64-1 >120mins
acetone cyanohydrin 75-86-5 >480mins
acetonitrile 75-05-8 >360mins
acrylic acid 79-10-7 >480mins
acrylonitrile 107-13-1 >120mins
ammonia 25% 1336-21-6
ammonia 33% 1336-21-6 >1920mins
ammonia gas 7664-41-7 >480mins
ammonium hydroxide solution 5% free NH3 1336-21-6 >1920mins
ammonium pentadecafluorooctanoate (30% in water) 3825-26-1 >1920mins
aniline 62-53-3 >480mins
arsenic acid 7778-39-4 >480mins
benzene 71-43-2 >240mins
benzyl chloride 100-44-7 >480mins
bromine 7726-95-6 >420mins
buta-1,3diene gas 106-99-0 >180mins
butyl acetate 123-86-4 >360mins
cable oil n/a >480mins
carbazole 86-74-8 >480mins
carbon disulphide 75-15-0 >60mins
chlorine gas 7782-50-5 >180mins
chloroacetic acid 85% 79-11-8 >1920mins
chromic acid 1333-82-0 >480mins
cyanogen chloride 506-77-4 >1920mins
cyclohexylamine 108-91-8 >480mins
dichlorobenzene 95-50-1
dichloromethane 75-09-2 >60mins
diethylamine 109-89-7 >120mins
diethylene glycol dimethylether 111-46-6 >480mins
dimethyl formamide 68-12-2 >300mins
epichlorohydrin 106-89-8 >420mins
ethanol 64-17-5 >480mins
ethyl acetate 141-78-6 >240mins
ethylene dichloride 107-06-2 >480mins
ethylene glycol 107-21-1 >480mins
ethylene oxide 75-21-8 >120mins
ethylenediamine tetra-acetic acid tetrasodium salt (EDTA) 5% 64-02-8 >480mins
formaldehyde, 37% sol 50-00-0 >480mins
formic acid 65% 64-18-6 >480mins
GD (Soman) 96-64-0 >1440mins
heptane 142-82-5 >480mins
hexane 110-54-3 >420mins
hydrazine 302-01-2 >480mins
hydrazine 5% 302-01-2 >480mins
hydrochloric acid 37% 7647-01-0 >1920mins
hydrofluoric acid 48% 7664-39-3 >1920mins
hydrofluoric acid 73% 7664-39-3 >480mins
hydrogen chloride gas 7647-01-0 >480mins
hydrogen fluoride gas 7664-39-3 >60mins
hydrogen peroxide (10 volume (3%) solution) 7722-84-1 >480mins
hydrogen peroxide 50% 7722-84-1 >480mins
iso-butane 75-28-5 >480mins
iso-butane followed by hyrdrofluoric acid 71-75% 75-28-5 / 7664-39-3 >480mins
iso-propanol (IPA) 67-63-0 >1920mins
lactic acid 50-21-5
lewisite 541-25-3 >1920mins
m-cresol 108-39-4 >480mins
methanol 67-56-1 >480mins
methyl ethyl ketone (M.E.K) 2-butanone 78-93-3 >120mins
methyl iodide 99% 74-88-4 >60mins
methyl methacrylate 80-62-6 >180mins
methyl pyrolidone, n 872-50-4 >480mins
methylene chloride gas 74-87-3 >60mins
monochloroacetic acid 79-11-8 >480mins
mustard gas 505-60-2 >1920mins
N,N-dimethylaniline 121-69-7 >480mins
N,N-dimetyl acetamide 127-19-5 >480mins
naphalene 91-20-3 >480mins
nitric acid 7697-37-2
nitric acid 50% 7697-37-2 >1920mins
nitric acid 70% conc 7697-37-2 >1920mins
nitric acid etchant 80/20 7697-37-2 >480mins
nitric acid, red fuming 7697-37-2 >240mins
nitrobenzene 98-95-3 >180mins
oleic acid 112-80-1
oleum 40% SO3 8014-95-7 >480mins
oxalic acid saturated solution 6153-56-6 >480mins
phenol 50% in methanol 108-95-2 / 67-56-1 >480mins
phenol 85% aqueous 108-95-2 >480mins
phosphoric acid 7664-38-2
phosphoric acid 25% 7664-38-2 >1920mins
phosphoric acid 75% 7664-38-2 >1920mins
potassium hydroxide 40% 1310-58-3
proponic acid 79-09-4
propylene oxide 75-56-9 >60mins
sarin gas 107-44-8 >1920mins
sodium cyanide 30wt% 143-33-9 >480mins
sodium hydroxide 1310-73-2
sodium hydroxide 40% 1310-73-2 >480mins
sodium hypochlorite 7681-52-9
sodium hypochlorite 16% 7681-52-9 >480mins
styrene 100-42-5 >480mins
sulphuric acid 96% 7664-93-9 >480mins
tetrachloroethylene 127-18-4 >180mins
tetraethyl lead (Octel Anti Knock) 78-00-2 >480mins
tetrahydrofuran 109-99-9 >180mins
toluene 108-88-3 >240mins
toluene-2,4-diisocyanate 584-84-9 >480mins
trichloroethane 71-55-6 >360mins
trichloroethylene 79-01-6 >180mins
triethanol-amine 102-71-6 >480mins
triethylene glycol 112-27-6 >480mins
Trigonox K-80 cumyl hydroperoxide 80% / 20% cumene 80-15-9 / 98-82-8 >480mins
VX 50782-69-9 >1920mins
xylene 1330-20-7 >240mins
Cryotuff
Search by chemical name or CAS number:
Chemical CAS Number Breakthrough times
acetaldehyde 75-07-0 >10mins
acetic acid, glacial 64-19-7 >480mins
acetone 67-64-1 >30mins
acetone cyanohydrin 75-86-5
acetonitrile 75-05-8 >60mins
acrylic acid 79-10-7
acrylonitrile 107-13-1
ammonia 25% 1336-21-6
ammonia 33% 1336-21-6
ammonia gas 7664-41-7 >480mins
ammonium hydroxide solution 5% free NH3 1336-21-6
ammonium pentadecafluorooctanoate (30% in water) 3825-26-1
aniline 62-53-3
arsenic acid 7778-39-4
benzene 71-43-2
benzyl chloride 100-44-7
bromine 7726-95-6
buta-1,3diene gas 106-99-0
butyl acetate 123-86-4
cable oil n/a
carbazole 86-74-8
carbon disulphide 75-15-0 >60mins
chlorine gas 7782-50-5 >480mins
chloroacetic acid 85% 79-11-8
chromic acid 1333-82-0
cyanogen chloride 506-77-4
cyclohexylamine 108-91-8
dichlorobenzene 95-50-1 >420mins
dichloromethane 75-09-2 >60mins
diethylamine 109-89-7 >120mins
diethylene glycol dimethylether 111-46-6
dimethyl formamide 68-12-2 >60mins
epichlorohydrin 106-89-8
ethanol 64-17-5 >480mins
ethyl acetate 141-78-6 >120mins
ethylene dichloride 107-06-2
ethylene glycol 107-21-1
ethylene oxide 75-21-8
ethylenediamine tetra-acetic acid tetrasodium salt (EDTA) 5% 64-02-8
formaldehyde, 37% sol 50-00-0
formic acid 65% 64-18-6
GD (Soman) 96-64-0
heptane 142-82-5
hexane 110-54-3 >180mins
hydrazine 302-01-2
hydrazine 5% 302-01-2
hydrochloric acid 37% 7647-01-0
hydrofluoric acid 48% 7664-39-3
hydrofluoric acid 73% 7664-39-3
hydrogen chloride gas 7647-01-0 >480mins
hydrogen fluoride gas 7664-39-3
hydrogen peroxide (10 volume (3%) solution) 7722-84-1
hydrogen peroxide 50% 7722-84-1
iso-butane 75-28-5
iso-butane followed by hyrdrofluoric acid 71-75% 75-28-5 / 7664-39-3
iso-propanol (IPA) 67-63-0
lactic acid 50-21-5 >480mins
lewisite 541-25-3
m-cresol 108-39-4
methanol 67-56-1 >240mins
methyl ethyl ketone (M.E.K) 2-butanone 78-93-3
methyl iodide 99% 74-88-4
methyl methacrylate 80-62-6
methyl pyrolidone, n 872-50-4
methylene chloride gas 74-87-3
monochloroacetic acid 79-11-8
mustard gas 505-60-2
N,N-dimethylaniline 121-69-7
N,N-dimetyl acetamide 127-19-5
naphalene 91-20-3
nitric acid 7697-37-2
nitric acid 50% 7697-37-2
nitric acid 70% conc 7697-37-2
nitric acid etchant 80/20 7697-37-2
nitric acid, red fuming 7697-37-2
nitrobenzene 98-95-3
oleic acid 112-80-1 >420mins
oleum 40% SO3 8014-95-7
oxalic acid saturated solution 6153-56-6
phenol 50% in methanol 108-95-2 / 67-56-1
phenol 85% aqueous 108-95-2
phosphoric acid 7664-38-2 >480mins
phosphoric acid 25% 7664-38-2
phosphoric acid 75% 7664-38-2
potassium hydroxide 40% 1310-58-3 >480mins
proponic acid 79-09-4
propylene oxide 75-56-9
sarin gas 107-44-8
sodium cyanide 30wt% 143-33-9
sodium hydroxide 1310-73-2
sodium hydroxide 40% 1310-73-2 >480mins
sodium hypochlorite 7681-52-9
sodium hypochlorite 16% 7681-52-9 >480mins
styrene 100-42-5
sulphuric acid 96% 7664-93-9 >480mins
tetrachloroethylene 127-18-4 >120mins
tetraethyl lead (Octel Anti Knock) 78-00-2
tetrahydrofuran 109-99-9
toluene 108-88-3
toluene-2,4-diisocyanate 584-84-9
trichloroethane 71-55-6
trichloroethylene 79-01-6
triethanol-amine 102-71-6
triethylene glycol 112-27-6
Trigonox K-80 cumyl hydroperoxide 80% / 20% cumene 80-15-9 / 98-82-8
VX 50782-69-9
xylene 1330-20-7
Cryolite
Search by chemical name or CAS number:
Chemical CAS Number Breakthrough times
acetaldehyde 75-07-0 >180mins
acetic acid, glacial 64-19-7 >1920mins
acetone 67-64-1
acetone cyanohydrin 75-86-5
acetonitrile 75-05-8
acrylic acid 79-10-7
acrylonitrile 107-13-1
ammonia 25% 1336-21-6 >480mins
ammonia 33% 1336-21-6
ammonia gas 7664-41-7 >480mins
ammonium hydroxide solution 5% free NH3 1336-21-6
ammonium pentadecafluorooctanoate (30% in water) 3825-26-1
aniline 62-53-3
arsenic acid 7778-39-4
benzene 71-43-2
benzyl chloride 100-44-7
bromine 7726-95-6
buta-1,3diene gas 106-99-0
butyl acetate 123-86-4
cable oil n/a
carbazole 86-74-8
carbon disulphide 75-15-0
chlorine gas 7782-50-5
chloroacetic acid 85% 79-11-8
chromic acid 1333-82-0
cyanogen chloride 506-77-4
cyclohexylamine 108-91-8
dichlorobenzene 95-50-1
dichloromethane 75-09-2
diethylamine 109-89-7
diethylene glycol dimethylether 111-46-6
dimethyl formamide 68-12-2
epichlorohydrin 106-89-8
ethanol 64-17-5 >480mins
ethyl acetate 141-78-6 >120mins
ethylene dichloride 107-06-2
ethylene glycol 107-21-1
ethylene oxide 75-21-8
ethylenediamine tetra-acetic acid tetrasodium salt (EDTA) 5% 64-02-8
formaldehyde, 37% sol 50-00-0
formic acid 65% 64-18-6
GD (Soman) 96-64-0
heptane 142-82-5
hexane 110-54-3
hydrazine 302-01-2
hydrazine 5% 302-01-2
hydrochloric acid 37% 7647-01-0
hydrofluoric acid 48% 7664-39-3
hydrofluoric acid 73% 7664-39-3
hydrogen chloride gas 7647-01-0
hydrogen fluoride gas 7664-39-3
hydrogen peroxide (10 volume (3%) solution) 7722-84-1
hydrogen peroxide 50% 7722-84-1
iso-butane 75-28-5
iso-butane followed by hyrdrofluoric acid 71-75% 75-28-5 / 7664-39-3
iso-propanol (IPA) 67-63-0 >1920mins
lactic acid 50-21-5 >480mins
lewisite 541-25-3
m-cresol 108-39-4
methanol 67-56-1 >480mins
methyl ethyl ketone (M.E.K) 2-butanone 78-93-3
methyl iodide 99% 74-88-4
methyl methacrylate 80-62-6
methyl pyrolidone, n 872-50-4 >480mins
methylene chloride gas 74-87-3
monochloroacetic acid 79-11-8
mustard gas 505-60-2
N,N-dimethylaniline 121-69-7
N,N-dimetyl acetamide 127-19-5
naphalene 91-20-3
nitric acid 7697-37-2 >1920mins
nitric acid 50% 7697-37-2
nitric acid 70% conc 7697-37-2
nitric acid etchant 80/20 7697-37-2
nitric acid, red fuming 7697-37-2
nitrobenzene 98-95-3
oleic acid 112-80-1
oleum 40% SO3 8014-95-7
oxalic acid saturated solution 6153-56-6
phenol 50% in methanol 108-95-2 / 67-56-1
phenol 85% aqueous 108-95-2
phosphoric acid 7664-38-2 >480mins
phosphoric acid 25% 7664-38-2
phosphoric acid 75% 7664-38-2
potassium hydroxide 40% 1310-58-3
proponic acid 79-09-4 >480mins
propylene oxide 75-56-9
sarin gas 107-44-8
sodium cyanide 30wt% 143-33-9
sodium hydroxide 1310-73-2 >1920mins
sodium hydroxide 40% 1310-73-2
sodium hypochlorite 7681-52-9 >1920mins
sodium hypochlorite 16% 7681-52-9
styrene 100-42-5
sulphuric acid 96% 7664-93-9
tetrachloroethylene 127-18-4
tetraethyl lead (Octel Anti Knock) 78-00-2
tetrahydrofuran 109-99-9
toluene 108-88-3
toluene-2,4-diisocyanate 584-84-9
trichloroethane 71-55-6
trichloroethylene 79-01-6
triethanol-amine 102-71-6
triethylene glycol 112-27-6
Trigonox K-80 cumyl hydroperoxide 80% / 20% cumene 80-15-9 / 98-82-8
VX 50782-69-9
xylene 1330-20-7

Product Selector

Type of danger

Type of danger Content

Clothing Application

Clothing Application Content

Respiratory Protection

Respiratory Protection Content

Breathing Apparatus

Breathing Apparatus Content

Back

Back


Submit

Back

GARMENT SEARCH RESULTS

We have found the following products suitable for your application:

Start Again










Contact Us






Contact Us

Enquiry Submitted Successfully

Item added to Comparison List

View Comparison